Forge Ladeluftkühler für Audi TT-RS 8S


Erfolgreich an unserem TT-RS getestet!

Auswahl zurücksetzen
Artikelnummer: MTBfmint11 Kategorie: Product ID: 8008


Um die teilweise hohe Ansauglufttemperatur zu senken empfehlen wir diesen Forge Intercooler. Dieses Bauteil haben wir selbst an unserem Projektfahrzeug verbaut und können es empfehlen.

Zur Montage müssen geringe Änderungen an der originalen Fahrzeugfront erfolgen. gerne übernehmen wir die Montage für 450€ bei uns in Essen.

Produktinformation vom Hersteller:

„The TTRS core is a huge 640x250x100 and of bar and plate design. This gives it a huge 56% more surface area than stock, and an even more impressive 94% increase in volume. The end tanks are made with integrated pipes in order to retain the stock boost hoses, though you can also replace the hoses with our FMKT024 boost hose set if you so wish. Just like on the 8V chassis, we supply a genuine Audi TTRS crash bar which we modify in house in order to accept the new larger core, then finish both the crash bar and core in our standard black crackle finish powder coat for maximum longevity.

As shown in the graph above, for both tests we let the car heatsoak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of 36°C), then did a dyno pull from there. This gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.


On the stage 1 car we tested on (with map and exhaust modifications), it made 470.5 bhp with a peak intake temperature of 76°C. With just this intercooler fitted and no other modifications, the same car made 520.8 bhp with a peak inlet temperature of 34°C, a gain of 50 bhp and a drop of 41°C. Gains on stage 2 mapped cars will likely be even more impressive as the stock intercooler core really starts to struggle on just stage 1 mapped cars.

The kit contains everything needed for installation including full fitting instructions, which should take around 3-4 hours.“

Es handelt sich hierbei um einen Motorsportartikel aus England welcher folglich ohne Tüv-Gutachten geliefert wird.

Bei Fragen kontatieren Sie uns bitte.

Zusätzliche Information